Application - extrusion for construction of surface mounted fixtures with a focused beam of light Assembly - with screws appropriately selected for the surface - with mounting brackets - with suspension accessories - with mounting adhesives Additional information - possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof - the insert setting adjustment enables 10, 30, 60 and 90 degree beam angles Profile bending Minimum internal radius 150mm Minimum external radius 250mm - minimum radius - bending radius which when exceeded causes destruction (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile - internal radius - refers to the profile bent so that the cover is facing the inside of the arch - external radius - refers to the profile bent so that the cover is facing the outside of the arch - irregular curves are possible after consultation and individual quotation - when bending anodized profiles, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius) |
---|
IP Rating |
|
Control Gear |
|
Finishes |
|
Supplier of high-end lighting solutions to the Australian and New Zealand architecture and design community.
Share the lightbox using the following public link. Any changes you make to this lightbox will automatically be reflected this shared link.