Application
- for use in interior architecture in numerous configurations
- small lock facilitates building long linear, suspended, and polygonal lighting fixtures
- the sealed version can be used in external applications
Assembly
- mounted to the surface with appropriate mounting adhesives, mounting springs or screws
- can be suspended using UCHO-ZM eye hangers, PUSZ system
Additional information
- possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof
- the profile is suitable for bending into gentle arches, in the plane adjacent to the LED strip
- can be equipped with transparent and frosted covers, as well as aluminum-colored or metallized plastic end caps
Profile bending with covers: HS, LIGER, KA, K-BIS.
Minimum internal radius 400mm
Minimum external radius 400mm
- minimum radius - bending radius which when exceeded causes destruction (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile
- internal radius - refers to the profile bent so that the cover is facing the inside of the arch
- external radius - refers to the profile bent so that the cover is facing the outside of the arch
- irregular curves are possible after consultation and individual quotation
- when bending anodized profiles, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius) |