Application - for construction of serviceable LED lighting fixtures, straight and angled, built-in and suspended, producing the effect of a "thin line of light" Assembly - TEPIKO is mounted in drywall boards using elastic fixing glues - the "built-in" PIKO-ZM is mounted in the TEPIKO profile with the TEKNIK latch (sold separately) - the "suspended" PIKO-ZM is mounted using other KLU? accessories dedicated to the "small lock" Additional information - fast and reliable installation of sealed LED strips "5-KLIK" (LED strip in a special silicone sleeve ensuring increased tightness) - Ideal for use in bathrooms and other rooms with high humidity - the TEPIKO profile is sold with the "TEPIKO protective insert" Profile bending - the profile can be twisted along the axis Minimum internal radius 220mm Minimum external radius 120mm - minimum radius- bending radius which when exceeded causes destruction (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile - internal radius- refers to the profile bent so that the cover is facing the inside of the arch - external radius- refers to the profile bent so that the cover is facing the outside of the arch - irregular curves are possible after consultation and individual quotation - when bending anodized profiles, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius) |
---|
IP Rating |
|
Control Gear |
|
Finishes |
|
C1168ANODA_1 | 1M PIKO-ZM PROFILE ANODISED | Not Favourited Not in current lightbox |
C1168ANODA_2 | 2M PIKO-ZM PROFILE ANODISED | Not Favourited Not in current lightbox |
No products match filter criteria |
Supplier of high-end lighting solutions to the Australian and New Zealand architecture and design community.
Share the lightbox using the following public link. Any changes you make to this lightbox will automatically be reflected this shared link.